http://www.qualityinspection.org/conditions-to-accept-before-qc-inspections/ Advice and tips for successful quality control of consumer products made in China & Asia: sourcing strategies, quality control... Fri, 10 Feb 2012 09:05:57 +0000 hourly 1 http://wordpress.org/?v=3.3.1 http://www.qualityinspection.org/conditions-to-accept-before-qc-inspections/comment-page-1/#comment-442 How to do QC inspections by yourself | Manufacturer China Mon, 15 Feb 2010 07:37:32 +0000 http://www.qualityinspection.org/?p=296#comment-442 [...] already listed some of the conditions to set straight before inspection [...] [...] already listed some of the conditions to set straight before inspection [...]

]]> http://www.qualityinspection.org/conditions-to-accept-before-qc-inspections/comment-page-1/#comment-437 Renaud Anjoran Sun, 14 Feb 2010 16:45:05 +0000 http://www.qualityinspection.org/?p=296#comment-437 @ Orientix: thanks for the good remarks. Of course these are only general guidelines to follow. They are not to be followed blindly. Regarding bribery: I disagree. Sometimes a supplier tries to give money to the inspector, who denounces it to his supervisor, and what happens? The supplier will say it's normal, and he didn't know it was forbidden! @ Orientix: thanks for the good remarks. Of course these are only general guidelines to follow. They are not to be followed blindly.
Regarding bribery: I disagree. Sometimes a supplier tries to give money to the inspector, who denounces it to his supervisor, and what happens? The supplier will say it’s normal, and he didn’t know it was forbidden!

]]> http://www.qualityinspection.org/conditions-to-accept-before-qc-inspections/comment-page-1/#comment-436 orientix Sun, 14 Feb 2010 16:37:46 +0000 http://www.qualityinspection.org/?p=296#comment-436 >Confirmation of inspection date Sometimes confirmation date needs to be given long ahead when production is in remote areas, or abroad. Some production areas need visa to be arranged before actually possible to go there. Make that clear case by case. > Please allow 24h between the end of inspection and the ex-factory date. Depends the product. Some products are fabricated with potential hazardous materials (e.g. glue). These articles need to "rest" longer before closed up in a container. If not, goods might be blocked in arrival harbour, cause container exceeds acceptable "gaz" level. > A passed report is not permission to ship. You should wait for your customer’s decision. This is in particular important to explain to the suplier, but maybe even much more important to explain to your customer ! > paragraph about bribery Don't put in writing. This is China. The boss should check this behaviour ! Have regular dinners with your suppliers and others close by ! >Confirmation of inspection date
Sometimes confirmation date needs to be given long ahead when production is in remote areas, or abroad. Some production areas need visa to be arranged before actually possible to go there. Make that clear case by case.
> Please allow 24h between the end of inspection and the ex-factory date.
Depends the product. Some products are fabricated with potential hazardous materials (e.g. glue). These articles need to “rest” longer before closed up in a container. If not, goods might be blocked in arrival harbour, cause container exceeds acceptable “gaz” level.
> A passed report is not permission to ship. You should wait for your customer’s decision.
This is in particular important to explain to the suplier, but maybe even much more important to explain to your customer !
> paragraph about bribery
Don’t put in writing. This is China. The boss should check this behaviour ! Have regular dinners with your suppliers and others close by !

]]> http://www.qualityinspection.org/conditions-to-accept-before-qc-inspections/comment-page-1/#comment-433 How to do QC inspections by yourself Sun, 14 Feb 2010 15:54:05 +0000 http://www.qualityinspection.org/?p=296#comment-433 [...] already listed some of the conditions to set straight before inspection [...] [...] already listed some of the conditions to set straight before inspection [...]

]]>